- Basic Functions
- Supported Machine Integrations
- Use Cases
- Frequently Asked Questions (FAQ)
- Troubleshooting
Linked pages:
By clicking the name, you will be directed to a new page.
1. Basic Functions ^
1. Pages ^
The ribbon at the top indicates all the pages that are included in the Infrakit software. Map is the default starting page when you log in to Infrakit software. By clicking the page icon below, you can find more information about each page.
By clicking the Infrakit logo on the left-top corner of the page, the user will be directed to the Infrakit starting page.
2. Tabs ^
Five tabs can be found from the "Equipment" page: "OVERVIEW", "EFFICIENCY", "USAGE STATISTICS", "ASSIGNMENTS", and "ACCURACY".
From the left upper corner next to the tab names, overall statistics can be found.
"Online" indicates the total amount of equipment online in the project.
"Efficiency" indicates the overall efficiency of the equipment in the project.
"Work hours" indicates the overall working hours that the equipment has registered.
OVERVIEW ^
In the "OVERVIEW" tab, all the equipment that is registered for the project is listed.
Certain information is provided, considering registered equipment:
There are three color codes that indicate the state of the machine.
If the color next to the equipment is green, the equipment is online and should be functioning correctly.
If the color next to the equipment is yellow, the equipment is offline and does not communicate with Infrakit.
If the color next to the equipment is red, the assigned models in the Infrakit are not syncronized with the equipment.
By hovering the cursor over the exclamation mark icon, the user receives information about the latest accuracy calibration of specific equipment.
In the column "Actions", two operations are provided:
By clicking the gear icon, the user will be directed to the "Edit Equipment" page.
By clicking the downward arrow icon, which represents the "Download as-builts" function, a new box will open.
By inserting dates into the "From" and "To" bars, the user can determine the timespan in which the log points will be downloaded. The user can choose from three different download formats: "CSV", "GT", and "XML".
From the "VENDOR", "TYPE", "STATION", "LAST SYNC", "EFFICIENCY", "CONNECTION TIME (7D)", "DRIVER", and "ADDITIONAL INFO" columns, the user can observe different information considering the equipment's performance, connection, and other valuable metadata.
The user can filter the equipment list using filter tools, which are explained in section "Filtering and Sorting Tools".
EFFICIENCY ^
In the "EFFICIENCY" tab, the user can observe the efficiency of individual equipment.
By clicking the left or right arrow icons, the user can browse to observe the efficiency of the machine in different weeks.
From the "Last Equipment Activity" bar, the user can observe the last activity date of the equipment. By clicking the bar, the chart will be navigated to that week.
From the "Today" button, the user can navigate to the current week.
From the "Download efficiency CSV" button, the user can download an efficiency report of the equipment as a CSV file.
USAGE STATISTICS ^
In the "USAGE STATISTICS" tab, the user can observe the usage of individual equipment.
Infrakit receives information about the location of the equipment at a frequent pace. Based on the changes in the location data, Infrakit provides the activity data. Every time changes in the location have been detected, Infrakit considers the equipment to be active for 15 minutes.
A light green color indicates that the equipment has been active.
A dark green color indicates that the equipment has been passive.
By clicking the left or right arrow icons, the user can browse to observe the efficiency of the machine in different weeks.
From the "Last Equipment Activity" bar, the user can observe the last activity date of the equipment. By clicking the bar, the chart will be navigated to that week.
From the "Today" button, the user can navigate to the current week.
From the "Connection" section, the user is able to observe the quality of the connection between Infrakit and the equipment.
From the "Models" section, the user can observe the models the equipment has used and the time frame the model has been in use.
ASSIGNMENTS ^
In the "ASSIGNMENTS" tab, the user can manage the assignments assigned to equipment and create new assignments.
By clicking the "+ Create assignment" button, a new box will open.
To create an assignment, the user must insert the name of the assignment in the "Name" bar.
In the "Assign to equipment" section, the user can select the equipment to which the assignment will be assigned.
By checking the box next to the "Make" column, the user can select all the equipment in the list.
From the drop-down bar under the "Make" header, the user can filter the equipment list by vendor.
From the drop-down bar under the "Type" header, the user can filter the equipment list by the type of equipment.
By inserting a name in the bar under the "Name" header, the user can filter the equipment list by the name of the equipment.
By checking the box next to individual equipment, the user can select specific equipment.
In the "Selected" section, the user can observe the total number of selections.
The user must click the "Save" button at the end to complete the creation. If the user wants to close the window without creating the assignment, the "Cancel" button can be clicked.
All the created assignments will be listed under the "+ Create assignment" button.
By clicking "Delete", the user can delete the assignment.
Above the folder tree, different tools can be found to browse the folders.
In the "Filter tree" bar, the user can search folders or files from the folder tree.
By clicking the "Expand tree" button, the whole folder tree will be revealed.
By clicking the "Tree settings" button, a box will appear.
As a default, empty folders in the folder tree are hidden, and this cannot be changed.
"On start, expand", the user can determine how the folder tree is shown when the tab is opened. "None" means that only the root folder is shown; "First level" means that the folders that are under the root folder will be shown; "All" means that all the folders in the folder tree will be shown; and "Restore previous state" means that the previous state of the folder tree will be restored when the tab is opened.
From the folder tree, the user can select folders and files that will be included in the specific assignment. When selecting folders and files for an assignment, four tools are available.
By clicking the "Save" button, the user can save the changes.
By clicking the "Reset changes" button, the user can withdraw the recent changes and restore the latest saved state.
By clicking the "X Clear" button, the user can clear all the selections.
By clicking the "All" button, the user can select all the folders and files.
ACCURACY ^
In the "ACCURACY" tab, the user can observe the calibration accuracy of individual equipment.
At the top of the tab, the user can manually add approved calibration points. In the "Measured" column, the user must insert the x, y, and z coordinates of the measured point in the "N", "E", and "Z" bars. In the "Reference" column, the user must insert the x, y, and z coordinates of the reference calibration point in the "N", "E", and "Z" bars. In the "Delta" column, the difference between these two coordinate points will be calculated. In the "Code" bar, the user can insert a code for the approved point. In the "Comment" bar, the user can insert a comment for the approved point. By clicking the "Add point" button, the point will be added to the "Approved points" section.
In the "Suggested points" section, the calibration points that have been created on the "Project Settings" page, section "Equipment Accuracy Calibration", will be listed if the equipment is within the determined radius distance.
In the "Approved points" section, all the approved calibration points will be listed.
In the "Rejected points" section, all the rejected calibration points will be listed.
By clicking the gear icon button at the top right corner, a box will appear.
By clicking "Edit project tolerance", the user will be directed to the "Project Settings" page section "Equipment Accuracy Calibration".
By clicking "Download project accuracy report (.xls)", the user can download an XLS file that includes the accuracy information of all the equipment currently in the project.
By checking "Show coordinates" box, the coordinates of calibration points will be revealed.
3. Filtering and Sorting Tools ^
In the header row of the tabs, different filtering and sorting tools can be found.
By clicking the "Sort" button, a new box will appear.
From the "VENDOR" drop-down bar, the user can filter the equipment list by the vendor of the system.
From the "TYPE" drop-down bar, the user can filter the equipment list by the type of equipment.
4. General Features ^
At the right corner of the top ribbon, four general features can be found.
By clicking the pen icon, the user will be directed to the "Project Editing" page.
From the drop-down box, the user can select the active project.
By clicking the bell icon, a new box appears.
"All" is the default tab when the box opens. In this tab, all the notifications on the project are listed.
The "Files" tab contains all notifications concerning files.
The "Folders" tab contains all notifications concerning folders.
The "Photos" tab contains all notifications concerning image files.
The "Service" tab contains general notifications concerning Infrakit software.
Through the "Chat" tab, users can send messages inside a project.
By clicking "Load more", the user can observe older notifications.
By clicking the gear icon, a new box will open.
This box contains six options: "Project settings", "User settings", "Admin", "Invitations", "Support Center", and "Log out".
By clicking "Project settings", the user will be directed to the "Project Settings" page.
By clicking "User settings", the user will be directed to the "User Settings" page.
By clicking "Admin", the user will be directed to the starting page of the "Admin" features.
By clicking "Invitations", the user will be directed to a new page where invitations can be viewed and accepted or rejected.
By clicking "Support center", the user will be directed to the "Support Center" web page, where guidelines for how to use Infrakit software can be searched and contact information can be found.
By clicking "Log out", the user will be logged out of the Infrakit software.
5. Customer Support Features ^
By clicking the speech bubble icon, a new box appears.
Through the "Search for articles" bar, the user can browse Infrakit's knowledge base using key words that, for example, represent functions, tools, or operations.
By clicking the "Create support ticket" button, a new view will appear.
In this view, the user can send a message to Infrakit's customer support team.
In the "Your name" bar, the user can insert his or her own name.
In the "Your email address" bar, the user can insert his or her own email address.
In the "Subject" bar, the user should write a succinct description of the issue.
In the "How can we help?" box, the user should describe the issue as detailed as possible. The more related information is provided, the easier it is for the support team to investigate the issue.
By clicking "Add attachment", the user can add attachments to the message. Attaching images, videos, and files where the issue occurs will help to solve the issue more efficiently.
By clicking the "Send message" button, the message will be sent to the support team.
2. Supported Machine Integrations ^
The user can integrate different machines from different vendors into Infrakit. In this section, supported integrations are listed.
Novatron, Leica iCON 3D and VisualMachine, Leica MC1, Trimble GCS900, Trimble Earthworks, Trimble Groundworks, Unicontrol, Topcon, Sandvik, Makin 3D, Arpego, Carlson, DigiPilot, Ditio, Geomax, marXact, Mts, Prolec, Techbelar.
3. Use Cases ^
Can't find what you're looking for?