Article suggestions
Quick guide how to set up integration between Infrakit and Makin3D
This documentation walks you through the flow for integrating Unicontrol Cloud backed systems, such as Unicontrol Machine Control and Rover and U3D-X by L5 navigation. Integration enables linking projects between two cloud systems, enables automated transfer of design models to Unicontrol Cloud and automates the equipment real-time position and as-built data to flow from Unicontrol Cloud to Infrakit.
Xsite PRO machine control system by MOBA and Novatron can host two different software solutions. This instruction helps to connect Landnova software to Infrakit.
Leica Geosystems machine control systems (iCON 3D and VisualMachine) can be integrated to Infrakit through Leica ConX service.
To make integration works properly drill rigs should use SanRemo for model transfer.
Follow these steps to enable the integration. Note that Sitelink3D V1 is not generally available no longer and you are most probably looking for Sitelink3D V2 instructions.
A machine at the site can measure a fixed mark / known point, and the difference to the known coordinate is calculated automatically. This allows you to see the deviation and approve or disapprove the item. The measuring history is saved with all the important information.
Xsite PRO machine control system by MOBA/Novatron can host two different software solutions.
Please note that your TCC account needs to have EDIT access in order for the integration to work.
Leica Geosystems machine control system MC1 can be integrated to Infrakit through Leica ConX service
This article walks you through the process for connecting Topcon machine control products, such as 3DMC to Infrakit.