Welcome to Infrakit Knowledge Base
Search our knowledge base for answers or contact support@infrakit.com / +358 9 4257 9297
Infrakit SURVEY
Infrakit SURVEY is available on Android for smartphones and tablets. When design engineers visit the site, they can take Infrakit SURVEY with them. It will show the project background map and main alignment line with user position and chainage, using the device's build-in GPS position. It allows opening of any background map or terrain model, drawing cross sections and showing measured points, even taking pictures and notes tied to their location with automatic uploading into Infrakit server if changes or other unexpected situations occur during a project. Note: Infrakit SURVEY does not support tilt compensation
Updated 4 days ago
Articles
Connecting Trimble R10 receiver and Infrakit SURVEY™ Android app
Step-by-step guide for connecting.
Connecting Leica GS14 receiver to Infrakit SURVEY™ Android App
Step-by-step guide for connecting.
Connecting CHCNAV smart receiver to Infrakit SURVEY Android app
Step-by-step guide for connecting.
Surveying with SURVEY App
With Infrakit SURVEY app you can take log points, navigate to points, and check grade/elevation after you have connected the application with your RTK GNSS Rover.
Connecting CHCNAV LT700H to Infrakit SURVEY App
Step-by-step guide for connecting
Connecting Spectra SP60 & Trimble SPS785 to Infrakit SURVEY App
Step-by-step guide for connecting
Supported GNSS devices for Infrakit SURVEY ™ App
Currently supported external GNSS receivers
Connecting Trimble R2 or Catalyst receiver and Infrakit SURVEY™ Android app
Step-by-step guide for connecting
Connecting SOKKIA GCX3 with Infrakit SURVEY and Ntrip
This article highlights settings required to pair up SOKKIA GCX3 receiver
Connecting GNSS Rovers to SURVEY app
You can connect virtually any NMEA streaming GNSS Rover device to Infrakit SURVEY app. However, each of them might require a bit different setup, which is in the end user responsibility. To make this as simple as possible, we have created a simple 3 way option to connect.