Lets' review step by step each of these features.

Taking log points

1. From the toolbar in the bottom of the map interface, select "Add Log point"

2. Before starting to take log points, define in which folder you want to store the taken points

3. And define the details those points will contain once stored

- Point number - You can select the point number (can be also letters) which the first taken point will contain, from here on the number will be incrementally increasing once you take points -> 1->2->3 / a->b->c / 101->102->103

- Point name

- Active alignment

- Model

- Code

-Surface code

- Line code

4. Then when you are ready, and have checked the GNSS connection is working as expected from the top left indicator - Press "Add logpoint" button on the bottom right

TIP: If you want to take many points continuously and do not want to review the taken logpoint information after each point, you can go to "Settings" -> "Logpoint settings" and toggle on "Skip logpoint confirmation"

Navigating to a point

There are two ways to navigate to a point:

1. You can select a point from the map by pressing it and start navigating

2. You can select from the "Staking" tool in the toolbar "more" which point to navigate to

Which ever way chosen you'll enter into a navigation view which shows you in which direction compared to your device the point is + how far it is

Checking grade/elevation (in closed beta yet)

- We will detail those here when the feature is ready to be shipped to your hands :)