- Select location source
- See: https://support.infrakit.com/help
- How to connect different receivers
- Select ”Surveying” icon
- Location info will show
- location source
- Current position
- Accuracy
- Pdop (The Position Dilution Of Precision)
- Values under 4 are good
- Position type
- Number of satellites
- Change stick height as measured
- Note: if GNSS rover is used via Bluetooth accuracy isn´t shown
- NMEA does not support accuracy
Taking log points
- Press settings to
- Select folder for log points
- Change
- point number (T4)
- point code (T3)
- point name
- line code (T2)
- surface code (T1)
- Auto increment point number increases point number by 1 every time log point is taken
- You can also manually enter log point
- Insert log point coordinates and attributes
- Insert log point coordinates and attributes
- Press ”save log point” icon to save log point
Navigating to point
- Go to Files
- Select folder that contains desired points
- In this example points are in as-build
- Also models page can contain point files
- Select desired log point
- App will show you info about the selected point
- Distance, elevation, dN, dE, will update as you move
- Distance, elevation, dN, dE, will update as you move